TENZ 200

TECHNICAL SPECIFICATION

Channel

Dual, isolated between channels

Intensity Control

Adjustable, 0-80 mA Max output 80 mA (peak to peak) into 500 ohm load each channel

Wave Form

Asymmetrical Bi-Phase Square Pulse

Voltage

Adjustable, 0-40 V Max output 40 V (Peak to Peak) into 500 ohm load each channel

Power Supply

One 9V battery (approximately 50 Hrs. at nominal settings)

Size

10cm (L) x 6cm (W) x 2.1cm (H)

Weight

120 grams with battery

Pulse Rate

Adjustable, from 2 Hz to 150 Hz

Pulse Width

Adjustable, from 30 uS to 260 uS

Burst Mode

Bursts occur every second
Pulse width(adjustable) frequency=100Hz

Modulation Mode

Pulse rate is automatically varied in a cyclic pattern over an interval of nominally 10 seconds (max.150Hz). Pulse rate decreases linearly over a period of 4 seconds from the control setting value to a value that is 40% less. The lower pulse rate will continue for 1 second, then increase linearly over 4 seconds to its original value. The original pulse rate will continue for 1 second. The cycle is then repeated. 

Timer

Adjustable: 15, 30 minutes, continuous

Max Charge per pulse

20 micro-coulombs